Marmitek IP EYE ANYWHERE 10 - ADVANCED Guide d'installation télécharger pdf (Page 43)

- Light Frequency: Select the proper frequency according

to the camera’s location to reduce the flicker: 50Hz, 60Hz

or Outdoor.

TIP When the camera is installed indoors, the Light Frequency

option can be set normally (50Hz or 60Hz). However, the

image of live video might be over exposure if the camera is

focusing on the object outdoors. When this happens, you

can set the option as Outdoor (even when the camera is

installed indoors) to fix over exposure issue.

4.5.2 Video & Audio >> Video

z H.264

- Video Resolution: Select the desired video resolution

from the four formats: SXGA, VGA, QVGA and QQVGA.

The higher setting (VGA) obtains better video quality while

it uses more resource within your network.

- Video Quality: Select the desired image quality from five

levels: Lowest, Low, Medium, High, and Highest.

- Frame Rate: Select a proper setting depending on your

network status.

z MPEG4

- Video Resolution: Select the desired video resolution

from the three formats: VGA, QVGA and QQVGA. The

higher setting (VGA) obtains better video quality while it

uses more resource within your network.

- Video Quality: Select the desired image quality from five

levels: Lowest, Low, Medium, High, and Highest.

- Frame Rate: Select a proper setting depending on your

network status.

z MJPEG

- Video Resolution: Select the desired video resolution

from the four formats: SXGA, VGA, QVGA and QQVGA.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 73 74

Pas de commentaire

Marmitek IP EYE ANYWHERE 10 - ADVANCED Guide d'installation Page 43