Marmitek SWM1P Manuel d'utilisateur télécharger pdf (Page 10)

Place the module with its backside against the rear side of the wall box,

behind the wiring.

• If the module is not yet or incorrectly programmed, it can now be

programmed.

" See ‘Programming’ chapter.

• Mount the momentary switch in the wall box after programming the

module and then click the push button with cover back onto the momentary

switch.

INSTALLING USING A DOUBLE 2-WAY MOMENTARY SWITCH - UP/

DOWN, PRESET AND LOCK

MIND: Per SWM1P only one motor can be connected at a time.

Never connect two or more motors parallel!

Connected to a double 2-way momentary switch you can control Up and

Down of the sunblind as well as move the sunblind to the Preset position with

one key. With the Lock key the sunblind can be blocked for control,

for instance during maintenance.

Figure 4.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Pas de commentaire

Marmitek SWM1P Manuel d'utilisateur Page 10