Marmitek X-10 Manuel d'utilisateur télécharger pdf (Page 3)

INSTALLATION INSTRUCTIONS FOR MARMITEK

X-10 IN-WALL DIMMER MODULE LW12™

SAFETY WARNINGS

• The wiring of your electrical installation is live (230 V) and extremely

dangerous. Never connect the module when plugged into the

mains. Always turn off the main switch before starting the

installation.

• This product is for professional use and should be installed by a

certified installer.

• To prevent short circuits, this product should only be used inside and

only in dry spaces. Do not expose the components to rain or moisture.

Do not use the product close to a bath, swimming pool etc.

• Do not expose the components of your systems to extremely high

temperatures or bright light sources.

• Do not open the product: the device contains live parts. The

product should only be repaired or serviced by a qualified

repairman.

• In case of improper usage or if you have opened, altered and

repaired the product yourself, all guarantees expire. Marmitek does

not accept responsibility in the case of improper usage of the

product or when the product is used for purposes other than

specified. Marmitek does not accept responsibility for additional

damage other than covered by the legal product responsibility.

• This product is not a toy. Keep out of reach of children.

• Adapters: Only connect the adapter to the mains after checking

whether the mains voltage is the same as the values on the

identification tags. Never connect an adapter or power cord when

it is damaged. In that case, contact your supplier.

• Automatic switching devices provide comfort, but can also be

dangerous. They can surprise people or can ignite clothing hanging

over an electric heat source. Please be careful and take appropriate

measures to avoid accidents.

3LW12

1 2 3 4 5 6 7 8 ... 13 14

Pas de commentaire

Marmitek X-10 Manuel d'utilisateur Page 3